Filtering Based on Port Numbers

The TCP and UDP protocols use port numbers in their header information to identify applications. Although filtering based on IP addresses blocks all network traffic from a particular source, you can use filtering rules that block only specific ports. Thus, you might allow customers to interact with Web servers inside your network using the ports set aside for WWW activity—port 80, for typical WWW traffic—but block other ports, such as port 23 that is used for Telnet functions.

As another example, you might want to allow some users to use Telnet (port 23) or FTP (ports 20 and 21) to connect to servers outside the corporate network while denying this capability to others. You can do this by setting up rules in the packet filter and specifying both a host source address and a port number. Ports are a two-way path. You can block incoming connections, outgoing connections, or both for each port.

Packet filtering is an integral component of most every firewall and has several advantages:

• Usually inexpensive—If you use a router to connect to external sources, you already have th hardware—you just need to configure it.

• Fast—It does only minimal processing on the header information and does not make decision based on multiple packets.

• Flexible—It is easy, although some would say cumbersome, to configure as many address inclusions or exclusions as you like.

However, there are also several disadvantages to using a packet filter firewall:

• Packet filters perform no authentication—A packet is a packet no matter "who" the sender is. The address is the only thing that counts. This is important because IP addresses, ports, and any other part of the packet can be forged using simple tools available on the Internet.

• Most system administrators don't take advantage of a router's auditing features– You will most likely not even know that attempts were made to break in to the network; if the router does provide some kind of statistical information, you won't be able to determine where the attack came from. If you turn on logging for every packet that comes through your router, you'll experience a tremendous slowdown in network response time through the router. Selectively logging events is a better option, but then again you might miss important events. Small SOHO routers do not provide logging, so keep that in mind if you use one.

• Packet filters operate at the network level—They are not very effective at stopping sophisticated attacks that are directed at higher-level protocols, such as TCP.

• Internal network information is not kept from outside prying eyes—Using ordinary utilities, such as Tracert and Ping, mischievous persons can gain knowledge about your network unless you specifically block the protocol used by these utilities (ICMP).

If you had the choice, which of the following would you choose:

• Allow everything, but deny specific addresses.

• Deny everything, but allow selected known good addresses.

If it's not obvious that the second choice is the best, you need to stop and think about this again.

A good approach for configuring the rules to use on a packet filter is to first deny all traffic. Then, selectively enable only those addresses or services that are essential to your business. If you try to do this in reverse—allowing all traffic and then denying specific items—there's no way you can create a set of rules that covers all possible sources of mischief. You might leave out something that didn't seem important at the time you did the configuration, or a new twist on an old technology might creep up and surprise you later.

From Bridges to Routers continue...

Using a Router to Segment the Network

Like bridges, routers can be used to isolate traffic between network segments. Unlike bridges, routers further reduce network bandwidth use because they do not pass broadcast messages from one segment to another unless programmed to do so. A router also does not have to take time to learn which nodes are connected to each segment. The information it needs is configured in advance—the administrator assigns protocols and addresses to each port. Routing protocols also use various methods to update each other about network topology as it changes.

One very important reason why routers are used to help organize a network into segments is that routers enable you to connect many network segments. Whereas bridges are limited to a few thousand nodes, depending on the topology used, routers can enable the LAN to be connected to an infinitely larger WAN, such as the Internet.

The internal processing that routers must perform make them slower than bridges (although that might not be the case with most high-end routers being manufactured today), which need to examine only a small amount of data in the packet header. Although this performance difference will not be noticed on network segments with only moderate traffic use, you might find that you need to place routers at only strategic locations throughout the network, retaining switches for connecting other computers or network segments. Remember that you can connect individual computers to a switch port or use the port to connect to other switches.

The method you use will depend on the usage patterns that can be monitored for each segment and the cost of the links used to connect different segments. Another thing to consider is that many of the high-end routers available today operate at what is called "wire speed." That means they can route packets at virtually the same speed as the network medium, with just the very slightest delay for processing time.

Connecting to a Larger WAN or the Internet

When connecting the LAN to a WAN, a router is required. When connecting to the Internet, for example, you cannot use a bridge or a repeater. The Internet is composed of a hierarchical IP address space and a router is needed to participate in this hierarchy. Or you might plan to use a dedicated line of some sort to connect to a larger corporate network. In that case, placing a router between your LAN and the WAN hardware, such as an ATM switch connection, will help reduce the traffic that crosses the expensive dedicated connection by keeping local traffic confined to the local network segments.

Note

There are two situations in which a router is not needed to make an Internet connection. The first is if you have a modem- based dial-up connection. Although it's possible to set up routing tables in operating systems such as Windows and Unix/Linux, this isn't really a practical method for connecting a small office IAN to the Internet due to the very limited speed.

The other situation is when you use a broadband connection, such as a cable or DSL modem. In this case, you can connect the high-bandwidth modem to a single computer and then set up routing tables so that other computers can send and receive traffic through the computer, which operates as a router. However, there's a better idea in a Small Office/Home Office (SOHO) or Remote Office Branch Office (ROBO) environment or a home environment where everyone from the parents to the kids have their own computers: Purchase an inexpensive 4-6 port router (for less than $100 in mast cases) that you can connect to the cable/DSL modem. These types of routers require very little knowledge about computers and can usually be set up in less than a half-hour.

Although you'll certainly have to configure the ports that connect the local LAN and the WAN interface, you might have to reconfigure addressing information on clients. For example, if you're already using a valid TCP/IP network address, possibly a subnet of the corporate network address space, you'll need to configure only routers.

If your business has just been acquired by a larger concern, however, you might find that your LAN has been assigned a new subnet by the larger corporation. In such a case, you'll probably have to plan on downtime for end users in order to make changes to important servers, such as Domain Name System (DNS) servers. DHCP servers (which workstations can find themselves) are used to translate between user-friendly names and IP addresses. Although DHCP can dynamically assign configuration information to workstations, important servers, such as DNS servers or gateways to other networks (usually routers), must have a static (unchanging) address. This is because part of the configuration information that DHCP supplies to clients is those addresses! If the address of a DNS server changed with every reboot of the server, you would have to reconfigure the information on each workstation client—a tedious effort even in a small network!

By using DHCP, you can overcome client configuration headaches such as this. Just reconfigure the DHCP server with the address range for the new subnet, add in the DNS servers and default gateway, and reboot your client computers. This is a simple explanation of the information supplied by DHCP servers. Indeed, you can use DHCP to provide configuration information for many other network parameters.